Accessibility Skip to content

Poly Systems - Leap Second Impact

Vulnerability Summary

On June 30, 2015, a leap second will be inserted into the NTP system’s time servers. Some are concerned that the leap second might cause problems for Poly products.  

 

There is zero reason to suspect that the leap second will be a problem. All Poly products that use NTP use newer NTP software packages that know how to process a leap second. All products tested so far have proven to absorb the leap second properly. Finally, the last leap second inserted into the NTP system (on June 30, 2012) caused no problems for Poly products at all.

Published

Last Update: 3/11/2022
Initial Public Release: 6/15/2015
Advisory ID:  PLYGN15-03

Product Affected
None.
Solution

None required.

 

Workaround

There is no workaround.

Contact

Any customer using an affected system who is concerned about this vulnerability within their deployment should contact Poly Technical Support(888) 248-4143, (916) 928-7561, or visit the Poly Support Site.

 

Revision History
VERSION DATE DESCRIPTION
1.0 6/15/2015 Original publication
2.0 3/11/2022 Format Change

©2022 Plantronics, Inc. All rights reserved.

Trademarks
Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc.  All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Poly.

Disclaimer
While Poly uses reasonable efforts to include accurate and up-to-date information in this document, Poly makes no warranties or representations as to its accuracy. Poly assumes no liability or responsibility for any typographical errors, out of date information, or any errors or omissions in the content of this document. Poly reserves the right to change or update this document at any time. Individuals are solely responsible for verifying that they have and are using the most recent Technical Bulletin. 

Limitation of Liability
Poly and/or its respective suppliers make no representations about the suitability of the information contained in this document for any purpose. Information is provided "as is" without warranty of any kind and is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall Poly and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive, or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of business information), even if Poly has been advised of the possibility of such damages.