Accessibility Skip to content

Poly has joined the HP family! From August 7, 2023, Poly Support contact options will connect you to HP. This portal will be live until November, when we'll move to the HP Customer Support site.

Studio - Logging of Excessive Data

Vulnerability Summary

There is an error in the device logging on the Poly Studio USB running software version 1.2 and earlier where excessive logging may block the logging of some security related events.  In some circumstances, logs may not record important details about the event when logging security information. This may make it more difficult to detect security related events and may hinder forensic analysis.  



Last Update: 3/8/2022
Initial Public Release: 6/26/2020
Advisory ID:  PLYPL20-06

Product Affected
Poly Studio

Prior to 3.1

3.1 and above

Poly recommends customers upgrade to firmware build 1.3 or later. 
Go to Poly Support.



There is no workaround.


Any customer using an affected system who is concerned about this vulnerability within their deployment should contact Poly Technical Support(888) 248-4143, (916) 928-7561, or visit the Poly Support Site.


Revision History
1.0 6/26/2020 Initial Release
2.0 3/8/2022 Format changes

©2022 Plantronics, Inc. All rights reserved.

Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc.  All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Poly.

While Poly uses reasonable efforts to include accurate and up-to-date information in this document, Poly makes no warranties or representations as to its accuracy. Poly assumes no liability or responsibility for any typographical errors, out of date information, or any errors or omissions in the content of this document. Poly reserves the right to change or update this document at any time. Individuals are solely responsible for verifying that they have and are using the most recent Technical Bulletin. 

Limitation of Liability
Poly and/or its respective suppliers make no representations about the suitability of the information contained in this document for any purpose. Information is provided "as is" without warranty of any kind and is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall Poly and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive, or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of business information), even if Poly has been advised of the possibility of such damages.