Accessibility Skip to content
Article ID: 000040128
Last Modified Date: 12/10/2021
Access Level: Public

Configure Static GAB Entries for Annex-O Dial Strings on the Polycom V2IU E-Series, SE200 ver 2, and Global Management System ver 7

SUMMARY
 
When using Polycom Global Management System or SE200 for Global Address Book functionality, it is possible to add Static entries to the GAB which will allow IP endpoints to dial Annex-O strings in order to make WAN calls via a Polycom V2IU E-Series (4300/4350, 5300E and 6400E). This example shows the configurations of the Static GAB entry for the following situations.
 
APPLIES TO
  • Polycom V2IU E-Series
  • SE200 version 2
  • Global Management System version 7.x
Example 1 SE200 version 2
Site A has VSX7000, SE200v2, and V2IU 4300T Site B has VSX3000, V2IU 4300T with Embedded Gatekeeper In order to do this, the Admin will add a Static entry using the following parameters:
  • IP Address: WAN IP Address of Site-B V2IU (i.e. 100.200.1.3)
  • E-164 Alias: the full dial-string as would be entered by the user at Site-A

Example 2 GMS version 7 Site A has VSX7000, GMS version 7, and V2IU 4300T Site B has VSX3000, V2IU 4300T with Embedded Gatekeeper In order to do this, the Admin will add a Static entry using the following parameters:
  • IP Address: WAN IP Address of Site-B V2IU (i.e. 78.98.65.3)
  • E-164 Alias: the full dial-string as would be entered by the user at Site-A
Note for GMS: this scenario was performed using GMS version 7.1.0.004.
GMS Software Version 7.x
ReadManager SE 200 Software Version 2.x