Accessibility Skip to content
Article ID: 000031238
Last Modified Date: 06/07/2021
Access Level: Public

Discovery 650E: Charging Information

Before using, you must first charge your headset.  1 hour is the minimum charge required for use, and 3 hours charge time will give the battery a full charge. Option A: Using the Included A/C Charger The indicator light glows red continuously while charging and turns off when fully charged.
  1. Plug the A/C charger into the base of the charging pocket and connect it to your power source.
  2. Insert the headset into the charging pocket.
Option B: Using a AAA Battery One AAA battery recharges the headset to full capacity.
  1. Twist the bottom the AAA battery charger counterclockwise and release the battery holder.
  2. Insert the battery into the AAA battery holder.
  3. Slide the battery holder back into the battery charger and turn clockwise.
  4. Snap battery the battery charger onto the charging pocket.  Ensure that the indentation on the battery charger connector aligns with the shirt clip on the charging pocket.
  5. Insert the headset into the charging pocket.
Caution: Only replace with a non-rechargeable AAA battery. Disconnecting Components To separate the components, grasp both the battery charger and the charging pocket with the shirt clip facing you.  Bend the components back and they will snap apart. Note: Do not twist the components apart.