Accessibilité

Poly has joined the HP family! From August 7, 2023, Poly Support contact options will connect you to HP. This portal will be live until November, when we'll move to the HP Customer Support site.

Article ID: 000029200
Date de dernière modification: 05/15/2021
Access Level: Public

M20/M24/M50: How to Pair

How do I pair my M20/M24/M50 headset with my cell phone or other device?
First time pairing:
Image of the M20 QuickPair Process The M20, M24, and M50 feature QuickPair technology, which means that the first time you turn the headset on, it automatically goes into pairing (discoverable) mode. To pair the headset,
  1. Turn on your device’s Bluetooth feature.
  2. Turn the headset on. The light on the headset should start flashing an alternating red-blue. If it doesn't, refer to the "Subsequent pairing" instructions below. Set the headset aside.
  3. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. The M20 appears as "PLT_M20" in your list of devices, and the M50 appears as "PLT_M50."
  4. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.
Subsequent pairing:
Image of the M20 Pairing Process If you need to pair the headset to your phone again - or to another device - you can do so by performing the following:
  1. Turn on your device’s Bluetooth feature.
  2. Turn the headset on.
  3. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the button and set the headset aside.
  4. On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. The M20 appears as "PLT_M20" in your list of devices, and the M50 appears as "PLT_M50."
  5. If prompted for a passkey, enter 0000 (four zeros). Note: Do not be alarmed if your phone does not prompt you for a passkey, because many phones do not.