Accessibilité Skip to content
Article ID: 000024223
Date de dernière modification: 05/15/2021
Access Level: Public

Voyager Edge UC (B255/B255-M): How to Connect with the BT300 Adapter

This procedure explains how to pair your Voyager Edge UC headset with the BT300 adapter.
To pair your Voyager Edge UC headset to its Bluetooth USB adapter:
  1. Start with the headset powered on. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the power button and set the headset aside.
  2. Plug the Bluetooth USB adapter into the computer. Once the devices pair successfully, the light on the headset stops flashing.
Note: For best performance, plug the USB adapter directly into the computer, and not a hub.