Paarungsanleitung für alle Bluetooth Headsets
Use the Interactive pairing guide or see below. You need to go into the device you wish to pair it and turn the Bluetooth feature first. Then you need to place the headset in pairing mode so your phone will find it. Once the headset is in "Pairing" mode you will then need to follow the instructions in your cell phone or Bluetooth device's user guide on how to go it to your phone and search for the headset & pair it to a Bluetooth headset. The passkey is 0000 (4 Zeros) except models M1000 and M1500 (see below for their number ) Find your model headset in the instructions below. Voyager Pro: Begin with the headset turned on. Press and hold the power button until the indicator LED flashes red/blue. The headset is now in pairing mode. If you don't see the red/blue flash, press and hold the power button to turn your headset off, and then press and hold the power button again until you see the red/blue flash. Voyager 510 Pressing and holding down the call control button and holding down the volume up at the same time until the indicator light on the headset starts flashing red then blue. Voyager 520:
indicator light flashes red and blue, release buttons. While pendant is flashing red and blue, use the phone menu to search for Bluetooth devices and select “260 Plantronics.” When prompted for passkey, enter 0000.
Calisto: Begin with the headset tuned off (press and hold the headset button for 4 seconds until you hear 4 descending beeps) After the headset is powered off remove it from the base. Press and hold the headset button on the headset for 4 to 6 seconds or until the headset indicator light flashes red and blue. M3000 & M3500: Pressing and holding down the volume up key and the talk button at the same time. Hold them in together until the indicator light on the headset starts flashing red then green. M2500: Start with the headset powered on. Press and hold down the call control button while also rotating the multi function dial upward (away from the light) until the indicator light on the headset starts flashing red then green. When prompted for passkey, enter 0000.
M1000 & M1500: Hit and hold the volume/mute switch in until the indication light starts blinking. M1500 adapter: Turn the headset on and the adapter off. On the headset push in and hold the mute/volume dial until the indicator light begins to flash. On the adapter press and hold the blue power button for 10 seconds. The light on the adapter will flash once after 3 seconds- continue to hold the power button for another-7 seconds until the light flashes red. If the pairing is successful, the headset will sound a tone and both the headset and adapter lights will turn off. For both the M1000 & M1500 ~ If you remove the battery cover from the headset and then remove the battery itself. On the Green PC board itself there will be a letter followed by 4 numbers. These 4 numbers are your personal PIN code. How do I subscribe (pair) my Voyager headset to its 510S (500A) charging base?/>