[VIDEO] How to Connect the Voyager Legend UC with the BT300 Adapter

The following procedure explains how to pair your Voyager Legend UC headset with the BT300 adapter.

Click on the image above to see a video that shows how to pair your Voyager Legend UC to the BT300 adapter.

To pair your Voyager Legend UC headset to the BT300:

1. Turn the headset on. Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing an alternating red-blue. Release the call control button and set the headset aside.
2. Plug the Bluetooth USB adapter into the computer. Once the devices pair successfully, the light on the headset stops flashing.

Note: For best performance, plug the USB adapter directly into the computer, and not a hub.