M1100 Voice Alerts

What You'll Hear	When You'll Hear It
Power On	After pressing the Power button for 2 seconds
Power Off	After pressing the Power button for 2 seconds
Talk Time: [x] hours	After powering the headset on and after ending a call. The hours range from "6 hours" to "less than 2 hours."
Battery Low	When you have under 30 minutes left before the battery must be recharged
Recharge Headset	When you have approximately 10 minutes left before the battery must be recharged
Connected	After turning the headset on or reconnecting a dropped Bluetooth signal
Phone 1 Connected	After powering the headset to “on” or reconnecting a dropped Bluetooth connection
Phone 2 Connected	After pairing a second phone using multipoint feature
Pairing	While the headset is in pairing/discoverable mode
Pairing Successful	After the phone paired successfully to the headset
Pairing Incomplete, Restart Headset	After the phone failed to pair with the headset
Volume Maximum	When you reached the highest volume level after pressing the volume up (+) button
Mute On	After pressing the volume up (+) and volume down (-) buttons at the same time during a call
Mute Off	After pressing the volume up (+) and volume down (-) buttons at the same time while on mute during a call
Lost Connection	When the phone loses the Bluetooth connection with the headset
Cancelled	After saying "cancel" to stop a voice command
Incoming call. You can say answer or ignore.	When you receive an incoming call
"Your phone is connected" or "No phone is connected"	When you check you connection status with the Voice recognition button