Accessibility
Skip to content
Article ID: 000025485
Last Modified Date: 16/05/2021
Access Level: Public
How to Conference Multiple Headsets using the Savi 7200 Series
The Savi 7200 series enables you to conference in up to three additional headsets with the master headset
There are two methods to conference in the guest headsets: secure and over-the-air. Use the secure method to conference headsets that are the same model as the master headset, and the over-the-air method to conference in different headset models. Note: A headset conference can only take place while the master headset has an active link. If the master headset is turned off, all the guest headsets will be dropped. Guest headset users can mute and adjust their volume independently; however, once the master headset is muted, all guest headsets are muted as well.
To conference in headset models identical to the master headset:
To conference in headsets of any model:
3. Single press the subscription button on the back of the base for the master headset (see below) The subscription light on the base flashes an alternating red/green, and a beep sounds in the master headset.
Master Headset
Note: Depending upon how dense your headset environment is (i.e. how many headsets are being used around you), you may need to have the headset fairly close to the base in order to perform an over-the-air subscription. If you are experiencing issues performing an over-the-air subscription, you may want to try moving the headset closer to the base.
To remove a guest headset: To remove a guest headset from the conference, press the call button of the headset you wish to remove. The subscription indicator light on the base will turn green.
To conference in headset models identical to the master headset:
- Place a call or ensure the master headset link is on.
- Place the guest headset in the charging cradle of the master headset base.
- Single press the call control button on the master headset (see above) to accept the guest headset link. The base subscription indicator light turns yellow, indicating a headset conference.
To conference in headsets of any model:
- Place a call or ensure the master headset link is on.
- On the guest headset, hold the volume up button (see above) until the indicator light on the headset is solid.
3. Single press the subscription button on the back of the base for the master headset (see below) The subscription light on the base flashes an alternating red/green, and a beep sounds in the master headset.
Master Headset
- Single press the call control button on the master headset (see below) to accept the guest headset link. The base subscription indicator turns yellow, indicating a headset conference.
Note: Depending upon how dense your headset environment is (i.e. how many headsets are being used around you), you may need to have the headset fairly close to the base in order to perform an over-the-air subscription. If you are experiencing issues performing an over-the-air subscription, you may want to try moving the headset closer to the base.
To remove a guest headset: To remove a guest headset from the conference, press the call button of the headset you wish to remove. The subscription indicator light on the base will turn green.