Skip to content

How to Conference Multiple Headsets using the Savi 7200 Series

Article ID:

000025485
The Savi 7200 series enables you to conference in up to three additional headsets with the master headset
There are two methods to conference in a guest headset: secure and over-the-air. Please note that a headset conference can only take place while the master headset has an active link. If the master headset is turned off, all the guest headsets will be dropped. Guest headset users can mute and adjust their volume independently; however, once the master headset is muted, all guest headsets are muted as well.
Secure Conference:
1. Place a call or ensure the master headset link is on.
2. Place the guest headset in the charging cradle of the master headset base.
  Master Headset 1. Single press the call control button on the master headset (see above) to accept the guest headset link. The base subscription indicator light turns yellow, indicating a headset conference. User-added image

 
Over the Air Subscription:
1. Place a call or ensure the master headset link is on.
2. On the guest headset, hold the volume up button (see above) until the indicator light on the headset is solid.   User-added image

3. Single press the subscription button on the back of the base for the master headset (see below)  The subscription light on the base flashes an alternating red/green, and a beep sounds in the master headset.

User-added image
Master Headset

1. Single press the call control button on the master headset (see below) to accept the guest headset link. The base subscription indicator turns yellow, indicating a headset conference. User-added image
Note: Depending upon how dense your headset environment is (i.e. how many headsets are being used around you), you may need to have the headset fairly close to the base in order to perform an over-the-air subscription. If you are experiencing issues performing an over-the-air subscription, you may want to try moving the headset closer to the base.  
To remove a guest headset:
To remove a guest headset from the conference, press the call button of the headset you wish to remove. The subscription indicator light on the base will turn green.