Skip to content
Article ID: 000025331
Last Modified Date: 07/28/2021
Access Level: Public

Savi Talk (WT100/T): How to Set Up the Base

Savi Talk (WT100/T): How to Set Up and Install the Base
To Set Up the Savi Talk Base: Step 1: Attach the Headset Charging Cradle to the Base Connect the headset charging cradle to the base. Push firmly on the cradle until the cradle snaps into place. Step 2: Connect the Base to the Desk Phone
  1. Connect the telephone interface cable to the telephone interface cable jack on the base.
  2. Disconnect the handset coil cord from the desk phone.
  3. Connect the telephone interface cable to the now open handset port on the desk phone.
  4. Connect the handset coil cord to the telephone interface cable junction box.
  5. Place the handset back on the telephone cradle.
Step 3: Connect the Power Supply to the Base
  1. Connect the base power supply into the power jack on the base.
  2. Connect the power supply to the outlet. The power indicator light will be solid red.
Step 4: Position the Base The minimum recommended separation between your desk phone and the base is about 6 inches (15 cm). The minimum recommended separation between the base and computer is about 12 inches (30 cm). Incorrect position can cause noise and interference problems.