HDA50 support
Open SIP Headset Adapter
Specifications
-
PRODUCT REQUIREMENTS
- Access to internet via a switched ethernet port
- Active phone service subscription with all required SIP credentials to make and receive calls
- USB Type-A headset supporting HID protocol
-
HDA50 SHIPS WITH
- HDA50 VoIP endpoint
- Power adapter
- 1 x RJ-45 ethernet cable (80 inches/203 centimeters)
- Quick start/installation guide
- Velcro tape
-
WARRANTY
- 1 year
-
PRODUCT DIMENSIONS (L X W X H)
- 6.9 cm x 6.9 cm x 3.0 cm (2.7 in x 2.7 in x 1.2 in)
-
UNIT WEIGHT
- 198 grams/7 ounces
- Shipping weight: 340 grams/12 ounces (including power supply, ethernet cable and packaging)
-
INTERFACE FEATURES
- Internet (WAN): 2 x 10/100BaseT ethernet port (802.3)
- USB Type-A: USB 2.0 (headset port)
- Reset button: located on bottom of case
- LED indications: power on, status, ethernet activity (WAN), upgrade in progress status, packet RX/ TX and USB headset status
- Phone: 2 x RJ-11 FXS analog phone port (optional)
-
TELEPHONY FEATURES
- Call routing rules
- SIP service configurable inbound call routing rules
- In-band DTMF (G.711)
- Out-of-voice band DTMF (RFC 2833)
- Out-of-voice band DTMF (SIP INFO method)
- Call progress tone generation
- Tone profile per SIP Service Provider and Polycom Device Management Service for Service Providers
- Ring profile per SIP Service Provider and Polycom Device Management Service for Service Providers
- Full duplex audio
- G.165, 168 echo cancelation
- VAD—voice activity detection
- Silence suppression
- Comfort noise generation
- Three-way conference calling with local mixing
- Daylight savings time support—worldwide
- Call waiting
- Maximum session control
-
DATA NETWORKING
- Ethernet Authentication (IEEE 802.1X)
- MAC address (IEEE 802.3)
- UDP (RFC 768) in SSL/TLS
- TCP (RFC 793) in SSL/TLS
- IP version 4, IPv4 (RFC 791)—static IP and DHCP support
- ICMP (RFC 792)
- ARP—address resolution protocol
- Domain name system (DNS) A records (RFC 1706) and SRV records (RFC 2782) RTP (RFC 1889, 1890), RFC 5966
- RTP/RTCP (RFC 1889), DHCP client (RFC 2131)
- DiffServ (RFC 2475)—independently configured: service, SIP and media
- ToS (RFC 791, 1349)—independently configured: service, SIP and media
- VLAN Tagging (802.1p—independently configured: service, SIP and media
- SNTP (RFC 2030)—primary and secondary NTP servers
- LLDP-MED
- Traverse through web proxy serveraccess via HTTP, TFTP— HTTPS
-
SECURITY
- Remote access interface: user name and password access via HTTP, TFTP— HTTPS
- Device web page standard: HTTP v1.1, XML v1.0
- Secure remote provisioning: HTTP, HTTPS
-
VOIP FEATURES
- Simple Certificate Enrollment Protocol (SCEP)
- Four (4) service provider configuration profile assignments (ITSP 1–4)
- Four (4) service/trunk subscription profile assignments (SP 1–4)
- SIPv2 (RFC 3261, 3262, 3263, 3264)
- SIP over UDP
- SIP over TCP
- SIP over TLS
- 4 SIP service provider service sessions—concurrent operation
- 1 Polycom Device Management Service for Service Providers session
- SIP proxy redundancy—local or DNS based SVR, primary and secondary fallback list restrict source IP address
- Maximum number of sessions—independent per service
- 4 trunk groups
- Voice gateway—direct dialing
- G.711 A-law (64 kbps)
- G.711 μ-law (64 kbps)
- G.726 (32 kbps) G.729a (8 kbps) iLBC (13.3, 15.2 kbps) codec pre-selection code
- Wideband codec (USB headset): G.722 (64 kbps), Opus
- Voice processing per SIP service—TX/ RX audio gain, echo cancellation
- Adjustable audio frames per packet
- Codec name assignment
- Codec profile per SIP SP and Service Provider and Polycom Device Management Service for Service Providers
- Dynamic audio payload
- Packet loss concealment
-
POWER
- Universal switching with fixed US, EU, UK style plug prongs (model dependent)
- AC input: 100 to 240 volts 0.3A 50–60Hz (26–34 VA)
- DC input: +12V 1.0 amp max
-
CERTIFICATIONS
- FCC part 15 class B
- A-tick
- CE
- ICES-003
- RoHS
- WEEE
- UL/cUL—power adapter
-
ENVIRONMENTAL CONDITIONS
- Operating temperature: 0º to 45º C (32º to 113º F)
- Relative humidity: 10% to 90% non-condensing
- Storage temperature: –25º to 85º C (–13º to 185º F)
-
MANAGEMENT—CONFIGURATION
- Remote provisioning: XML via TFTP or HTTP, (TR069/TR104 parameter naming syntax)
- Secure remote provisioning: HTTPS, encrypted XML via HTTP or TFTP— dedicated user name and password
- Secure remote firmware update: encrypted binary file via TFTP or HTTP + dedicated user name and password
- Customization: OBi-ZT: Obihai zero-touch automatic customization and configuration **
- Call history (CDRs): call detail records on Service Provider and Polycom Device Management Service for Service Providers web page, export to XML
- LED Indications: power, device status, upgrade progress status, ethernet activity, USB headset status
- Session information: SIP session status, Polycom Device Management Service for Service Providers status
- Primary SIP service set-up wizard: dedicated device web page for quick ITSP account set-up
- System settings back-up/restore: save and restore configuration via XML file to/from a local folder
-
RTP STATISTICS
- RTP transport type
- Audio codec type (Tx/Rx)
- Audio codec type (Tx/Rx)
- RTP packetization—in multiples of 10ms (Tx/Rx)
- RTP packet count (Tx/Rx)
- RTP byte count (Tx/Rx)
- RTP byte count (Tx/Rx)
- Packets out-of-order
- Packets interpolated
- Packets late (dropped)
- Packets lost
- Packet loss rate %
- Packet drop rate %
- Jitter buffer length–ms
- Received interarrival jitter–ms
- Jitter buffer underruns
- Jitter buffer overruns
-
CALL PROGRESS
- Configurable call progress tone
- Call progress tone profiles (2)
- Dial tone
- Busy tone
- Ringback tone
- Reorder tone
- Confirmation tone
- Holding tone
- Second dial tone
- Stutter tone
- Howling tone
- Prompt tone
- Call forwarded tone
- Conference tone
- SIT tones (1–4)
- Ringing and call waiting tone configuration
- Ring patterns (10)—configurable
- Call waiting tone patterns (10)—configurable
- Call waiting tone pattern profiles (2)
Warranty
-
Limited Warranty Terms -
Headset Warranty Service