Skip to content
  • OBi312

OBi312 support

VoIP adapter that connects your analog phone to Telco and VoIP services

Data Sheet
  • Product Requirements
    • Active Internet Connection
    • Analog Touch Tone Phone
    • Access to Internet Via a Switched Ethernet Port on Home or Office Router
    • (Optional) Active Internet Phone Service Subscription with All Required SIP Credentials to Make & Receive Calls
    • Internet (WAN): 1 x 10/100BaseT Ethernet Port (802.3)
    • Phone: 1 x RJ-11 FXS Analog Phone Port, 1 x RJ-11 FXO Analog Telco Port
    • USB: USB 2.0
    • Reset Button: Located on Bottom of Case
    • LEDs: Power/Status, Ethernet Activity (WAN), Phone
    • LED indications: Power On, Status, upgrade in Progress Status, Packet RX/TX, Phone Port Status
    • Configurable Contact List (Inbound Call Routing)
    • Automatic Attendant (English) with Configurable Answer Delay
    • PIN Access Control to AA (Up to 4 PINs)
    • Recursive Digit Map for Call Routing (AA, Phone, Voice Gateways, Trunk Groups)
    • AA Configurable Outbound Call Routing Rule
    • SIP Service Configurable Inbound Call Routing Rule (4)
    • Fax Pass Through (G.711)
    • T.38 Fax Relay for Real-Time Fax over IP
    • Modem Pass Through (G.711)
    • In-Band DTMF (G.711)
    • Out of Voice Band DTMF (RFC 2833)
    • Out of Voice Band DTMF (INFO Method)
    • Call Progress Tone Generation
    • Tone Profile per SIP SP and OBiTALK service
    • Ring Profile per SIP SP and OBiTALK service
    • Star Code Profile per SIP SP and OBiTALK service
    • Full Duplex Audio
    • G.165, 168 Echo Cancelation
    • VAD – Voice Activity Detection
    • Silence Suppression
    • Comfort Noise Generation
    • Three Way Conference Calling with Local Mixing
    • Hook Flash Event Signaling
    • Flash Hook Timer
    • Caller ID – Name & Number per Bellcore, ETSI and DTMF
    • MWI – Message Waiting Indicator
    • Daylight Savings Time Support – North & South Hemispheres
    • Caller ID Enable /Disable
    • Caller ID Number
    • Caller ID Name (Alphanumeric)
    • Caller ID Spoofing
    • Call Waiting
    • Maximum Session Control
    • Call Forward - Unconditional
    • Call Forward on Busy
    • Call Forward on No Answer (Ring Count Configurable)
    • Call Transfer Enable / Disable
    • Anonymous Call Block
    • Anonymous Call
    • Do Not Disturb
    • Call Return
    • Repeat Dialing
    • MAC Address (IEEE 802.3)
    • UDP (RFC 768)
    • TCP (RFC 793)
    • IP version 4, IPv4 (RFC 791) – Static IP and DHCP Support
    • ICMP (RFC 792)
    • ARP - Address Resolution Protocol
    • Domain Name System (DNS) A Records (RFC 1706) & SRV Records (RFC 2782) RTP (RFC 1889, 1890)
    • RTCP (RFC 1889), DHCP Client (RFC 2131)
    • DiffServ (RFC 2475) – Independently Configured: Service, SIP & Media
    • ToS (RFC 791, 1349) – Independently Configured: Service, SIP & Media
    • VLAN Tagging (802.1p) – Independently Configured: Service, SIP & Media
    • SNTP (RFC 2030) – Primary & Secondary NTP Servers
    • Local Access Interface: IVR Password
    • Remote Access Interface: User Name & Password Access via HTTP, TFTP – HTTPS
    • Device Web Page Standard: HTTP v1.1, XMLv1.0
    • Secure Remote Provisioning: TFTP, HTTP, HTTPS
    • Four (4) Service Provider Configuration Profile Assignments (ITSP 1-4)
    • Four (4) Service /Trunk Subscription Profile Assignments (SP 1-4)
    • SIPv2 (RFC 3261, 3262, 3263, 3264)
    • SIP over UDP
    • SIP over TCP
    • 4 SIP Service Provider Service Sessions – Concurrent Operation
    • 1 OBiTALK Service Session
    • SIP Proxy Redundancy – Local or DNS Based SVR, Primary & Secondary Fallback List Restrict Source IP Address
    • Maximum Number of Sessions – Independent per Service
    • Trunk Groups (4)
    • Voice Gateway – Direct Dialing (8)
    • G.711 A-Law (64 kbps)
    • G.711 μ-Law (64 kbps)
    • G.726 (32 kbps) G.729a (8 kbps) iLBC (13.3, 15.2 kbps) Codec Pre-selection Code
    • Voice Processing per SIP Service – TX/RX Audio Gain, Echo Cancellation
    • Adjustable Audio Frames per Packet
    • Codec Name Assignment
    • Codec Profile per SIP SP (4) & OBiTALK Service
    • Dynamic Audio Payload
    • Packet Loss Concealment
    • Jitter Buffer (Adaptive)
    • STUN
    • ICE
    • SUBSCRIBE / NOTIFY Framework (RFC 3265)
    • NOTIFY Dialog, Line Status
    • SUBSCRIBE Message Summary
    • VoIP NAT Interworking
    • DATE Header Support
    • Remote-Party-ID (RPID)
    • P-Asserted-Identity (PAID)
    • RTP Statistics in BYE Message
    • Universal Switching with Fixed US, EU, UK Style Plug Prongs (Model Dependent)
    • AC Input: 100 to 240 Volts 0.3A 50-60Hz (26-34 VA)
    • DC: +12V 1.0 Amp Max
    • FCC Part 15 Class B
    • A-Tick
    • WEEE
    • UL/cUL - Power Adapter
    • Local Access Interface: IVR, Web Page – Password Protected (Admin & User Level Log-in)
    • Remote Access Interface: Syslog (Multi-Level Granularity), Invokable via SIP Notify, Web, Provisioning
    • Device Web Page Standard: HTTP v1.1, XML v1.0
    • Remote Provisioning: XML via TFTP or HTTP, (TR069 / TR104 Parameter Naming Syntax)
    • Secure Remote Provisioning: SSL via HTTPS , Encrypted XML via HTTP or TFTP – Dedicated User Name & Password
    • Secure Remote Firmware Update: Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password
    • Customization: PDMS-SP Zero-Touch Automatic Customization & Configuration **
    • Call History (CDRs): Call Detail Records on OBi Web Page, Export to XML
    • LED Indications: Power, Device Status, Upgrade Progress Status, Ethernet Activity, PHONE Status
    • Session Information: SIP Session Status, OBiTALK Status, Phone Port Status
    • Primary SIP Service Set-Up Wizard: Dedicated Device Web Page for Quick ITSP Account Set-Up
    • System Settings Back-Up / Restore: Save & Restore Configuration via XML file to / from a Local Folder
    • CE
    • ICES-003
    • RoHS
    • Operating temperature: 0º to 45º C (32º to 113º F)
    • Relative humidity: 10% to 90% Noncondensing
    • Storage temperature: -25º to 85º C (-13º to 185º F)
    • RTP Transport Type
    • Audio Codec Type (Tx/Rx)
    • RTP Packetization - ms (Tx/Rx)
    • RTP Packet Count (Tx/Rx)
    • RTP Byte Count (Tx/Rx)
    • Peer Clock Differential Rate - PPM
    • Packets In Jitter Buffer
    • Packets Out-Of-Order
    • Packets Interpolated
    • Packets Late (Dropped)
    • Packets Lost
    • Packet Loss Rate %
    • Packet Drop Rate %
    • Jitter Buffer Length - ms
    • Received Interarrival Jitter - ms
    • DTMF Digits Received
    • Jitter Buffer Underruns
    • Jitter Buffer Overruns
    • Sequence Number Discontinuities
    • Skew Compensation – ms
    • Configurable Call Progress Tone
    • Call Progress Tone Profiles (2)
    • Dial Tone
    • Busy Tone
    • Ringback Tone
    • Reorder Tone
    • Confirmation Tone
    • Holding Tone
    • Second Dial Tone
    • Stutter Tone
    • Howling Tone
    • Prompt Tone
    • Call Forwarded Tone
    • Conference Tone
    • SIT Tones (1-4)
    • Ringing & Call Waiting Tone Configuration
    • Ring Patterns (10) - Configurable
    • Call Waiting Tone Patterns (10) - Configurable
    • Call Waiting Tone Pattern Profiles (2)
    • Configurable Start Codes
    • Star Code Profiles (2)
    • Redial
    • Call Return
    • Activate Block Caller ID
    • Deactivate Block Caller ID
    • Block Caller ID Once
    • Unblock Caller ID Once
    • Activate Call Forwarding (All Calls)
    • Deactivate Call Forwarding (All Calls)
    • Activate Call Forward on Busy
    • Deactivate Call Forward on Busy
    • Activate Call Forward on No Answer
    • Deactivate Call Forward on No Answer
    • Activate Block Anonymous Calls
    • Deactivate Block Anonymous Calls
    • Activate Call Waiting
    • Deactivate Call Waiting
    • Activate Do Not Disturb
    • Deactivate Do Not Disturb
    • Activate Repeat Dial
    • Deactivate Repeat Dial
    • Ringer Specifications: Ring Frequency: 14Hz – 68Hz, Ring Waveform: Trapezoidal, Sinusoidal, Ring Voltage: 55v – 85v
    • Maximum Ring Load: 5 REN (Ringer Equivalence Number)
    • Recursive Digit Map & Associated Outbound Call Routing
    • On-Hook Tip Ring Voltage: 30v – 52v
    • Off-Hook Current Max: 15mA – 45mA
    • Impedance: 12 Independent Settings
    • DTMF Playback Level: -90 dBm – 3dBm
    • Caller ID Method: Bellcore, ETSI (FSK or DTMF)
    • Caller ID Trigger (Before / After First Ring, Polarity Reversal)
    • Channel Tx Gain: -12dB to 6 dB at 1 dB Resolution
    • Channel Rx Gain: 12dB to 6 dB at 1 dB Resolution
    • Silence Detect Sensitivity
    • Hook Flash Time Max
    • Hook Flash Time Min
    • CPC Delay Time
    • CPC Duration
    • Idle Polarity
    • Connect Polarity
    • OBi312 Voice Service Bridge and Telephone Adapter
    • Power Adapter
    • 1 x RJ-45 Ethernet Cable (80 inches / 203 centimeters)
    • Quick Start / Installation Guide
    • 1 x RJ-11 Cable
    • 6.9 cm x 6.9 cm x 3.0 cm (2.7 in x 2.7 in x 1.2 in)
    • Unit weight: 198 grams / 7 ounces
    • Shipping weight: 340 grams / 12 ounces (Including Power Supply, Ethernet Cable, Telco Cables, and Packaging)