Poly Trio C60 unable to connect to WPA-Enterprise AP

A customer found an issue where they tried to connect to an Enterprise WPA Access Point as the Trio C60 would only send a Poly device certificate unlike the Poly Trio 8800/8500

Await the next 6.3.11 build. Main configuration parameters are: device.set="1" Device certificate for EAP-TLS and Root CA - they are in position 1 but they could be in position 2 device.sec.TLS.customDeviceCert1.set="1"
device.sec.TLS.customDeviceCert1.publicCert="Device public cert Base 64-Encoded"
device.sec.TLS.customDeviceCert1.privateKey="Private key Base 64-Encoded"
device.sec.TLS.customCaCert1.set="1"
device.sec.TLS.customCaCert1="Root CA Base 64-Encoded" TLS profile for 802.1X - it could be PlatformProfile2 as well device.sec.TLS.profileSelection.dot1x.set="1"
device.sec.TLS.profileSelection.dot1x="PlatformProfile1" All installed CA certificates accepted as root in TLS Platform Profile 1 device.sec.TLS.profile.caCertList1.set="1"
device.sec.TLS.profile.caCertList1="All"
Device cert to be used for 802.1X/EAP-TLS, note that customDeviceCert and profileSelection.dot1x must match here
device.sec.TLS.profile.deviceCert1.set="1"
device.sec.TLS.profile.deviceCert1="Platform1" Set country, enable Wi-Fi, set the SSID, security mode (WPA2-Enteprise), EAP method (EAP-TLS) and user device.wifi.country.set="1"
device.wifi.country="US"
device.wifi.enabled.set="1"
device.wifi.enabled="1"
device.wifi.ssid.set="1"
device.wifi.ssid=" Test"
device.wifi.securityMode.set="1"
device.wifi.securityMode="WPA2-Enterprise"
device.wifi.wpa2Ent.method.set="1"
device.wifi.wpa2Ent.method="EAP-TLS"
device.wifi.wpa2Ent.user.set="1"
device.wifi.wpa2Ent.user=" dot1x"
device.wifi.wpa2Ent.password.set="1"
device.wifi.wpa2Ent.password=" dot1x"