Skip to content
Article ID: 000024303
Last Modified Date: 05/15/2021
Access Level: Public

CS50-USB/CS60-USB: How to Install

This procedure describes how to install the CS50-USB/CS60-USB.
To install the CS50-USB/CS60-USB:
  1. Attach the stand to the base unit by inserting the stand pegs into the holes on the bottom of the base.
  2. Plug the USB cable into an available USB port on your computer.
  3. Plug the optional AC power supply into the bottom of the charging base and then into a wall outlet.
  4. Charge the headset by placing it into the docking cradle. The red light to the left of the headset remains on while the headset charges, and goes off when the headset is fully charged.