Cross-Site Scripting (XSS) and Cross-Site Request Forgery (CSRF) vulnerabilities were found on multiple Poly (Polycom) voice endpoints. The vulnerabilities are currently fixed, and customers are advised to upgrade to the latest software release that addresses the above vulnerabilities.
Last Update: 3/8/2022
Initial Public Release: 4/1/2020
Advisory ID: PLYVC20-04
|VVX101, VVX201, VVX301, VVX311, VVX401, VVX411, VVX501, VVX601, VVX150, VVX250, VVX350, VVX450, D60||
Prior to UCS 6.2
|UCS 6.2 and above|
|VVX300, VVX310, VVX400, VVX410, VVX500, VVX600||
Prior to UCS 5.9.6
|UCS 5.9.6 and above|
|SoundPoint IP and SoundStation IP||
Prior to USC 4.0.15
|USC 4.0.15 and above|
Poly recommends customers upgrade to the respective firmware build or later. The software, release notes, and other documentation for your voice endpoint can be found at Poly Support.
Poly recommends all customers upgrade to the latest version. Customers who need time to upgrade may disable the Web User Interface (Web UI) either by changing settings in the phone's user interface or through configuration file changes. Please check your product's Administrator Guide for specific instructions on how to do this.
Any customer using an affected system who is concerned about this vulnerability within their deployment should contact Poly Technical Support – (888) 248-4143, (916) 928-7561, or visit the Poly Support Site.
Poly would like to thank Matt Landers from Marshall Hallenbeck for reporting security vulnerabilities to us and for their coordinated disclosure.
|2.0||3/9/2022||Format changes and Detail clarifications|
©2022 Plantronics, Inc. All rights reserved.
Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Poly.
While Poly uses reasonable efforts to include accurate and up-to-date information in this document, Poly makes no warranties or representations as to its accuracy. Poly assumes no liability or responsibility for any typographical errors, out of date information, or any errors or omissions in the content of this document. Poly reserves the right to change or update this document at any time. Individuals are solely responsible for verifying that they have and are using the most recent Technical Bulletin.
Limitation of Liability
Poly and/or its respective suppliers make no representations about the suitability of the information contained in this document for any purpose. Information is provided "as is" without warranty of any kind and is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall Poly and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive, or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of business information), even if Poly has been advised of the possibility of such damages.