Voyager 815/855: Headset Controls

The below table covers the instructions for basic commands with your headset.

Action	Steps
Turn On the Headset	Press and hold the call control button until the indicator glows blue. Note: When your headset is in standby mode, the indicator is off. To confirm that your headset is on, press any button or slide the boom out. You should see a blue light flash or hear a tone.
Turn Off the Headset	Press and hold the call control button until the indicator glows red. When the power is off, the indicator stays off.
Answer a Call	Briefly press the call control button, or slide the boom to the open position.
End a Call	Briefly press the call control button, or slide the boom to the closed position.
Make a Call	The call automatically transfers to your headset after you enter the number into your phone and press send.
Toggle Mute On/Off	Press the mute button.
Turn Off the Online Indicator	Press and hold mute for 2 seconds while the headset is on. Headset will flash blue 4 times. Repeat action to activate online indicators. Headset will flash blue twice.
Adjust Volume	During a call, press the volume up or down buttons.