Voyager 815/855: Headset Controls
The below table covers the instructions for basic commands with your headset.
|Turn On the Headset|| Press and hold the call control button until the indicator glows blue.
Note: When your headset is in standby mode, the indicator is off. To confirm that your headset is on, press any button or slide the boom out. You should see a blue light flash or hear a tone.
|Turn Off the Headset||Press and hold the call control button until the indicator glows red. When the power is off, the indicator stays off.|
|Answer a Call||Briefly press the call control button, or slide the boom to the open position.|
|End a Call||Briefly press the call control button, or slide the boom to the closed position.|
|Make a Call||The call automatically transfers to your headset after you enter the number into your phone and press send.|
|Toggle Mute On/Off||Press the mute button.|
|Press and hold mute for 2 seconds while the headset is on. Headset will flash blue 4 times. Repeat action to activate online indicators. Headset will flash blue twice.|
|Adjust Volume||During a call, press the volume up or down buttons.|