Accessibility
Skip to content
The first time you power on your earbuds, the pairing process begins.
Poly has joined the HP family! From August 7, 2023, Poly Support contact options will connect you to HP. This portal will be live until November, when we'll move to the HP Customer Support site.
Article ID: 000025472
Last Modified Date: 08/05/2022
Access Level: Public
BackBeat GO 3: How to Pair
How do I pair my BackBeat GO 3 headset with my cell phone or other device?
First Time Pairing
The first time you power on your earbuds, the pairing process begins.
1. Power on the earbuds by pressing on the center button until you hear a pairing voice prompt and the LED on the right earbud flashes red and blue.
2. Activate Bluetooth on your phone and set it to search for new devices.
2. Activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth > On > Scan for devices*
• Android Settings > Bluetooth > On > Scan for devices*
NOTE * Menus may vary by device
3. Select “PLT BB GO 3 (BackBeat).” If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear “pairing successful” and the LEDs stop flashing.
To Pair to a Different Phone or Re-Pair to the Same Phone
To enter pair mode after the first pairing process, start with the earbuds powered off and press and hold the center button until you hear "pair mode."