BackBeat PRO 2 SE: How to Pair

This procedure explains how to pair your BackBeat PRO 2 SE headset to your phone or to another Bluetooth device.

NOTE: If your phone supports Near Field Communication (NFC) go to NFC pairing.

To pair your BackBeat PRO 2 SE the first time:

Slide the power switch to the ON position. The headphone LEDs flash red and blue.
Activate Bluetooth on your device and set it to search for new devices.
- iPhone: Settings> Bluetooth > On
- Android: Settings>Bluetooth > On> Scan for devices
Select "PLT BB PRO 2". The headset LEDs stop flashing upon successful pairing.

To pair your BackBeat PRO 2 SE to a second mobile device or to re-pair to the original device:

Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
Activate Bluetooth on your device and set it to search for new devices.
Select "PLT BB PRO 2". The headset LEDs stop flashing upon successful pairing.

NFC Pairing (must be supported by the mobile device)

Ensure NFC is ON and your phone display is unlocked.
Tap and hold the headphones to the NFC's tag location until NFC pairing completes. If necessary accept the connection.
NOTE: The headphone's NFC tag is located on the outside of the left ear cup (phone tag locations vary).