Accessibility Skip to content
Article ID: 000027197
Last Modified Date: 05/15/2021
Access Level: Public

Handset Lifter Accessory: External Ring Detector

About the Ring Detector Cable
Image of the ring detector cable The external ring detector cable should be used with if your telephone's speaker is not located beneath the hand receiver. While you shouldn't need this cable if your phone's speaker is located beneath the hand receiver, you may want to use it if your headset does not notify you when the phone rings.
How to Install
Image of how to install the ring detector cable
  1. Remove the cover from the ringer microphone jack on the HL10.
  2. Connect the ringer microphone plug to the ringer microphone jack in the HL10.
  3. Remove the protective cover from the mounting tape and attach the microphone to the telephone speaker.
Your HL10 with ring detector cable might look like the picture below. Please note that your setup might be slightly
different depending on your telephone model.
Image of the HL10 with ring detector cable