Accessibility Skip to content
Article ID: 000024216
Last Modified Date: 05/15/2021
Access Level: Public

Explorer 10/50: How to Pair

The following procedure explains how to pair your Explorer 10/50 headset with your phone or other Bluetooth device.
First time pairing

Wearing your headset, power it on. The first time you do this it will begin the pairing process. You hear “pairing” and the headset indicator lights flash red and blue.

Second time pairing
  1. With the headset turned on, put the headset into pairing mode by pressing and holding the call control button until you see the indicator light flash an alternating red-blue.
  2. Activate Bluetooth® on your phone and set it to search for new devices.
    • iPhone: go to Settings Bluetooth On
    • Android: go to Settings Bluetooth On Scan for devices
  3. Select “PLT_E10" for the Explorer 10 and "PLT_E50” for the Explorer 50
  4. If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired you hear “pairing successful.”