Skip to content

A-100: How to Install

Article ID:

How do I install the Practica A-100 model?

The A-100 plugs into your standard desk/office phone at the handheld receiver port. To connect it to the phone:
  1. Disconnect the hand held receiver out of the phone. 
  2. Plug it into the empty port on the side of the A-100 base (next to the hardwired short cord).
  3. Plug the hard wired short cord that comes from the side of the A-100 base back into the phone, where the hand held receiver was. The A-100 headset plugs into the front of the A-100 base, under the Mute button.
Make sure you have 2 fresh AA batteries in the A-100 base. The battery compartment is located on the top of the A-100.