Skip to content
  • OBi504

OBi504 support

4 port VoIP Adapter connects small business analog phones to the digital voice communications world

  • Product requirements
    • Active Internet Connection
    • Analog Touch Tone Phone
    • Access to Internet Via a Switched Ethernet Port on Home or Office Router
    • (Optional) Active Internet Phone Service Subscription with All Required SIP Credentials to Make and Receive Calls
    • CPU: 1.6GHz 32-bit ARM
    • Memory: 256 MB
    • Flash Storage: 32 MB
    • Ethernet: 1 x Gigabit Ethernet Port (802.3), 3 x 10/100BaseT Ethernet Port (802.3)
    • Phone: 8 x RJ-11 FXS Analog Phone Port • USB: 3 x 2.0
    • Audio: 1 x 3.5mm Line-in, 1 x 3.5mm Lineout
    • Reset Button: Located on Rear of Case
    • LEDs: Power/Status, Ethernet Activity 1-4, Phone Port 1-8
    • LED Indications: Power On, Ethernet Activity RX/TX, Status, Upgrade-inProgress Status, Phone Port 1-8 Status
    • Call Routing Rules
    • Automated Attendant with Configurable Answer Delay
    • PIN Access Control to AA (Up to 4 PINs)
    • Recursive Digit Map for Call Routing (AA, Phone, Voice Gateways, Trunk Groups)
    • AA Configurable Outbound Call Routing Rules
    • SIP Service Configurable Inbound Call Routing Rules
    • Fax Pass Through (G.711)
    • T.38 Fax Relay for Fax over IP
    • Modem Pass Through (G.711)
    • In-Band DTMF (G.711)
    • Out of Voice Band DTMF (RFC 2833)
    • Out of Voice Band DTMF (SIP INFO Method)
    • Call Progress Tone Generation
    • Tone Profile per SIP SP and OBiTALK Service
    • Ring Profile per SIP SP and OBiTALK Service
    • Star Code Profile per SIP SP and OBiTALK Service
    • Full Duplex Audio
    • G.165, 168 Echo Cancelation
    • VAD—Voice Activity Detection
    • Silence Suppression
    • Comfort Noise Generation
    • Three Way Conference Calling with Local Mixing
    • Hook Flash Event Signaling
    • Flash Hook Timer
    • Caller ID—Name and Number per Bellcore, ETSI, DTMF, and NTT
    • MWI—Message Waiting Indicator
    • Visual Message Waiting Indication (VMWI)
    • Daylight Savings Time Support— Worldwide
    • Caller ID Enable /Disable
    • Caller ID Number
    • Caller ID Name (Alphanumeric)
    • Caller ID Spoofing
    • Call Waiting
    • Maximum Session Control
    • Call Forward—Unconditional
    • Call Forward on Busy
    • Call Forward on No Answer (Ring Count Configurable)
    • Call Transfer Enable/Disable
    • Anonymous Call Block
    • Anonymous Call
    • Do Not Disturb
    • Call Return
    • Repeat Dialing
    • Customizable Music On Hold
    • MAC Address (IEEE 802.3)
    • UDP (RFC 768) in SSL/TLS
    • TCP (RFC 793) in SSL/TLS
    • IP version 4, IPv4 (RFC 791)—Static IP and DHCP Support
    • ICMP (RFC 792)
    • ARP—Address Resolution Protocol,
    • Domain Name System (DNS) A Records (RFC 1706) and SRV Records (RFC 2782) RTP (RFC 1889, 1890), RFC 5966
    • RTP/RTCP (RFC 1889), DHCP Client (RFC 2131)
    • DiffServ (RFC 2475)—Independently Configured: Service, SIP and Media,
    • ToS (RFC 791, 1349)—Independently Configured: Service, SIP and Media,
    • VLAN Tagging (802.1p)—Independently Configured: Service, SIP and Media,
    • SNTP (RFC 2030)—Primary and Secondary NTP Servers
    • LLDP-MED
    • Local Access Interface: IVR Password
    • Remote Access Interface: User Name and Password Access via HTTP, TFTP— HTTPS
    • Device Web Page Standard: HTTP v1.1, XML v1.0
    • Secure Remote Provisioning: HTTP, HTTPS
    • Nine (9) Service Provider Configuration Profile Assignments (SP 1–9)
    • Ten (10) Service/Trunk Subscription Profile Assignments (SP 1–9
    • Four (4) Hunt Groups
    • SIPv2 (RFC 3261, 3262, 3263, 3264)
    • SIP over UDP
    • SIP over TCP
    • SIP over TLS
    • 32 SIP Service Provider Service Sessions—Concurrent Operation
    • 1 OBiTALK Service Session
    • SIP Proxy Redundancy—Local or DNS Based SVR, Primary and Secondary Fallback List Restrict Source IP Address
    • Maximum Number of Sessions— Independent per Service
    • Voice Gateway—Direct Dialing
    • G.711 A-Law (64 kbps)
    • G.711 µ-Law (64 kbps)
    • G.726 (32 kbps) G.729a (8 kbps) iLBC (13.3, 15.2 kbps) Codec Pre-selection Code
    • Voice Processing per SIP Service—TX/ RX Audio Gain, Echo Cancellation
    • Adjustable Audio Frames per Packet
    • Codec Name Assignment
    • Codec Profile per SIP SP and OBiTALK Service
    • Dynamic Audio Payload
    • Packet Loss Concealment
    • Jitter Buffer (Adaptive)
    • STUN
    • ICE
    • SUBSCRIBE/NOTIFY Framework (RFC 3265)
    • NOTIFY Dialog, Line Status
    • SUBSCRIBE Message Summary
    • VoIP NAT Interworking
    • DATE Header Support
    • Remote-Party-ID (RPID)
    • P-Asserted-Identity (PAID)
    • RTP Statistics in BYE Message and SIP PUBLISH with MOS Score
    • Universal Switching with Plug Pigtail (Region Dependent)
    • AC Input: 100 to 240 Volts 0.3A 50–60Hz (26-34 VA)
    • DC Input: +12V 5.0 Amp Max
    • Local Access Interface: IVR, Web Page— Password Protected (Admin and User Level Log-in)
    • Remote Access Interface: Syslog (MultiLevel Granularity), Invokable via SIP Notify, Web, Provisioning
    • Device Web Page Standard: HTTP v1.1, XML v1.0
    • Remote Provisioning: XML via TFTP or HTTP, (TR069/TR104 Parameter Naming Syntax)
    • Secure Remote Provisioning: HTTPS, Encrypted XML via HTTP or TFTP— Dedicated User Name and Password
    • Secure Remote Firmware Update: Encrypted Binary File via TFTP or HTTP + Dedicated User Name and Password
    • Customization: OBiTALK Zero-Touch Customization and Configuration
    • Call History (CDRs): Call Detail Records on OBi Web Page, Export to XML
    • LED Indications: Power, Device Status, Upgrade Progress Status, Ethernet Activity, PHONE Status
    • Session Information: SIP Session Status, OBiTALK Status, Phone Port Status
    • Primary SIP Service Set-Up Wizard: Dedicated Device Web Page for Quick ITSP Account Set-Up
    • System Settings Back-Up/Restore: Save and Restore Configuration via XML file to/ from a Local Folder
    • RTP Transport Type
    • Audio Codec Type (Tx/Rx)
    • RTP Packetization—in multiples of 10ms (Tx/Rx)
    • RTP Packet Count (Tx/Rx)
    • RTP Byte Count (Tx/Rx)
    • Packets Out-Of-Order
    • Packets Interpolated
    • Packets Late (Dropped)
    • Packets Lost
    • Packet Loss Rate %
    • Packet Drop Rate %
    • Jitter Buffer Length–ms
    • Received Interarrival Jitter–ms
    • Jitter Buffer Underruns
    • Jitter Buffer Overruns
    • Configurable Call Progress Tone
    • Call Progress Tone Profiles (2)
    • Dial Tone
    • Busy Tone
    • Ringback Tone
    • Reorder Tone
    • Confirmation Tone
    • Holding Tone
    • Second Dial Tone
    • Stutter Tone
    • Howling Tone
    • Prompt Tone
    • Call Forwarded Tone
    • Conference Tone
    • SIT Tones (1–4)
    • Ringing and Call Waiting Tone Configuration
    • Ring Patterns (10)—Configurable
    • Call Waiting Tone Patterns (10)— Configurable
    • Call Waiting Tone Pattern Profiles (2)
    • Star Code Configuration
    • Configurable Star Codes
    • Star Code Profiles (2)
    • Redial
    • Call Return
    • Activate Block Caller ID
    • Deactivate Block Caller ID
    • Block Caller ID Once
    • Unblock Caller ID Once
    • Activate Call Forwarding (All Calls)
    • Deactivate Call Forwarding (All Calls)
    • Activate Call Forward on Busy
    • Deactivate Call Forward on Busy
    • Activate Call Forward on No Answer
    • Deactivate Call Forward on No Answer
    • Activate Block Anonymous Calls
    • Deactivate Block Anonymous Calls
    • Activate Call Waiting
    • Deactivate Call Waiting
    • Activate Do Not Disturb
    • Deactivate Do Not Disturb
    • Activate Repeat Dial
    • Deactivate Repeat Dial
    • Ringer Specifications: Ring Frequency: 14Hz—68Hz, Ring Waveform: Trapezoidal, Sinusoidal, Ring Voltage: 55v—85v
    • Maximum Ring Load: 5 REN (Ringer Equivalence Number) per Phone Port
    • Recursive Digit Map and Associated Outbound Call Routing
    • On-Hook Tip Ring Voltage: 30v—52v
    • Off-Hook Current Max: 15mA—45mA
    • Impedance: 12 Independent Settings
    • DTMF Playback Level: –90 dBm—3dBm
    • Caller ID Method: Bellcore, ETSI (FSK or DTMF)
    • Caller ID Trigger (Before/After First Ring, Polarity Reversal)
    • Channel Tx Gain: –12dB to 6 dB at 1 dB Resolution
    • Channel Rx Gain: 12dB to 6 dB at 1 dB Resolution
    • Silence Detect Sensitivity
    • Hook Flash Time Max
    • Hook Flash Time Min
    • CPC Delay Time
    • CPC Duration
    • Idle Polarity
    • Connect Polarity
    • OBi504vs Universal Voice Adapter
    • Power Adapter
    • 1 x RJ-45 Ethernet Cable (80 inches/203 centimeters)
    • 19" Rack, Wall and Desktop Rack Mounts
    • Quick Start/Installation Guide
    • 1 year Hardware (Limited)
    • 27 cm x 16.5 cm x 4.5 cm (10.6 in x 6.5 in x 1.8 in)
    • Unit weight: 1.25 kg/2.76 lbs
    • Shipping weight: 1.59 kg/3.5 lbs (Including Power Supply, Ethernet Cable, Rack Mounts, and Packaging)