Poly VVX phones (all models) are vulnerable to path traversal manipulations that could be used by a malicious party to gain unauthorized access to the system.
Last Update: 3/11/2022
Initial Public Release: 12/9/2015
Advisory ID: PLYVC15-10
VVX 101/VVX 201
VVX 300/VVX 310
VVX 400/VVX 410
VVX 500/VVX 600
UC Software 4.1.8 and prior
UC Software 5.2.3 and prior
UC Software 5.3.1 and prior
UC Software 5.4.0 and prior
UC Software 5.2.4
UC Software 5.3.2
UC Software 5.4.0A
Poly recommends customers upgrade to the respective firmware build as required.
For customers who cannot immediately upgrade to a non-vulnerable UCS version, administrators may mitigate this vulnerability by disabling the web server on VVX phones. In addition, we recommend administrators follow standard best practices and change all default passwords and firewall web access to VVX phones.
To disable a phone’s web server via provisioning, set the httpd.enabled parameter to 0 in your profiles. Consult the VVX Administrator Guide for additional details. This setting can also be reconfigured directly on the phone by an administrator, under:
Settings -> Advanced -> Administration Settings -> Web Server Configuration.
On Poly phones with UC Software 5.1.1 or later that are registered with a Skype for Business Server, access to the Web Configuration Utility is by default disabled as a security precaution.
Any customer using an affected system who is concerned about this vulnerability within their deployment should contact Poly Technical Support – (888) 248-4143, (916) 928-7561, or visit the Poly Support Site.
Poly would like to thank Jake Reynolds from Depth Security for reporting security vulnerabilities to us and for their coordinated disclosure.
©2022 Plantronics, Inc. All rights reserved.
Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Poly.
While Poly uses reasonable efforts to include accurate and up-to-date information in this document, Poly makes no warranties or representations as to its accuracy. Poly assumes no liability or responsibility for any typographical errors, out of date information, or any errors or omissions in the content of this document. Poly reserves the right to change or update this document at any time. Individuals are solely responsible for verifying that they have and are using the most recent Technical Bulletin.
Limitation of Liability
Poly and/or its respective suppliers make no representations about the suitability of the information contained in this document for any purpose. Information is provided "as is" without warranty of any kind and is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall Poly and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive, or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of business information), even if Poly has been advised of the possibility of such damages.