Accessibility Skip to content

HDX - Improper Neutralization of Special Elements used in an OS Command

Vulnerability Summary

A critical vulnerability has been discovered in the Poly shell (psh) functionality on the HDX’s diagnostics port (port tcp/23). This vulnerability could allow a remote attacker to execute arbitrary code on the HDX, which could lead to compromise of the system.  

 

Published

Last Update: 3/14/2022
Initial Public Release: 11/15/2017
Advisory ID:  PLYTV17-07

Product Affected
PRODUCTS FIRMWARE FIX
HDX 4000

Prior to 3.1.11 hotfix

3.1.11 hotfix and above
HDX 6000

Prior to 3.1.11 hotfix

3.1.11 hotfix and above
HDX 7000

Prior to 3.1.11 hotfix

3.1.11 hotfix and above
HDX 8000

Prior to 3.1.11 hotfix

3.1.11 hotfix and above
HDX 9000

Prior to 3.1.11 hotfix

3.1.11 hotfix and above
Solution

Poly recommends customers upgrade to firmware build 3.1.12 or later.

 

Workaround

Poly recommends following standard best practices for Unified Communications, as detailed in our best practices paper.

Contact

Any customer using an affected system who is concerned about this vulnerability within their deployment should contact Poly Technical Support(888) 248-4143, (916) 928-7561, or visit the Poly Support Site.

 

Revision History
VERSION DATE DESCRIPTION
1.0 11/15/2017 Initial Release
1.1 11/15/2017 Updated publication with Hotfix availability
1.2 11/24/2017 Updated publication with GA build availability
2.0 3/14/2022 Format Changes

©2022 Plantronics, Inc. All rights reserved.

Trademarks
Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc.  All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Poly.

Disclaimer
While Poly uses reasonable efforts to include accurate and up-to-date information in this document, Poly makes no warranties or representations as to its accuracy. Poly assumes no liability or responsibility for any typographical errors, out of date information, or any errors or omissions in the content of this document. Poly reserves the right to change or update this document at any time. Individuals are solely responsible for verifying that they have and are using the most recent Technical Bulletin. 

Limitation of Liability
Poly and/or its respective suppliers make no representations about the suitability of the information contained in this document for any purpose. Information is provided "as is" without warranty of any kind and is subject to change without notice. The entire risk arising out of its use remains with the recipient. In no event shall Poly and/or its respective suppliers be liable for any direct, consequential, incidental, special, punitive, or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of business information), even if Poly has been advised of the possibility of such damages.